Availability: In Stock
Each dripper is adjustable by turning the top dial to water from 0 to 10 GPH and releasing drops of water up to spraying 8 individual streams of water in a 3-ft diameter
Use these adjustable drippers to gently water patio and potted plants or your landscapes
A 25 PSI pressure regulator MLA-25PR and a filter MLFF-41 are highly recommended to be used first at the water source when using these drippers
Install these drippers directly into the 1/2-in poly tubing by first snapping a hole using either of our punch tools MLA-51 or MLA-TOOL
If you punch a hole in the wrong place or want to relocate the dripper then simply remove it from the 1/2-in poly and snap in one of our goof plugs MLA-51G
These drippers can also be installed by running a piece of 1/4-in vinyl tubing to the plant from the 1/2-in poly tubing using the enclosed 1/4-in barbed couplers then by pushing in the dripper at the other end of the 1/4-in vinyl next to the plant
Our 1/4-in support stakes MLT-DST can be used to securely hold the 1/4-in vinyl and this adjustable dripper near the plant
Also use our 1/4-in tees and elbows MLT-ATE to run the 1/4-in vinyl in opposing directions or in tight corners to supply water to these drippers
With a beginning water pressure of 25 PSI you can install up to 30 of these drippers off our 1/2-in poly tubing
Powered By mymedicalmealplan.com © 2023